BAC VC2-982 Evaporative Condenser - 982 Tons

BAC VC2-982 Evaporative Condenser. 982 nominal tons using R-22 at a 105ºF condensing temperature, a 40ºF suction temperature, and a 78ºF wet-bulb temperature. 696 tons using R-717(ammonia) at a 96.3ºF condensing temperature, a 20ºF suction temperature, and a 78ºF wet-bulb temperature. (4) fans. (2) 5 hp pumps. Belt: 2B154. Shipping Weight: 38,940 lbs (14,400 lbs heaviest). Overall Dimensions: 23 ft. 8-1/2 in. L x 11 ft. 10 in. W x 15 ft. 2 in. H.

BAC VC2-982 Evaporative Condenser - 982 Tons

BAC VC2-982 Evaporative Condenser. 982 nominal tons using R-22 at a 105ºF condensing temperature, a 40ºF suction temperature, and a 78ºF wet-bulb temperature. 696 tons using R-717(ammonia) at a 96.3ºF condensing temperature, a 20ºF suction temperature, and a 78ºF wet-bulb temperature. (4) fans. (2) 5 hp pumps. Belt: 2B154. Shipping Weight: 38,940 lbs (14,400 lbs heaviest). Overall Dimensions: 23 ft. 8-1/2 in. L x 11 ft. 10 in. W x 15 ft. 2 in. H.

Unused BAC / Frick XLP2 Evaporative Condenser - 953 Tons

Unused Frick Forced Draft Counter-flow Evaporative Condenser. Model: XLP2-1224-1114. Serial No: U110077004. BAC Crossover Model: VCA-1075A. Nominal Capacity: 11,440 MBH [953 Tons with R-22 refrigerant] based on 95º F condensing temperature with an entering wet bulb of 76.90º F. Tonnage Rating using ammonia refrigerant: 762 TR. Fan HP: 40. Airflow Rate: 134,600 CFM. Pump Motor: [2] 5 HP. Shipping Weight: 42,590 lbs [17,340 lbs heaviest section]. Overall dimensions: [2] fan sections: 13 feet 2 inches L x 11 feet 10 inches W x 10 feet H [each], [2] coil sections: 14 feet L x 11 feet 11 inches W x 8 feet H [each], [2] sections of frame work: 14 feet 4 inches L x 8 feet 4 inches W x 8 feet 4 inches H [each].[ACN1203a]

Unused BAC / Frick XLP2 Evaporative Condenser - 953 Tons

Unused Frick Forced Draft Counter-flow Evaporative Condenser. Model: XLP2-1224-1114. Serial No: U110077001. BAC Crossover Model: VCA-1075A. Nominal Capacity: 11,440 MBH [953 Tons with R-22 refrigerant] based on 95º F condensing temperature with an entering wet bulb of 76.90º F. Tonnage Rating using ammonia refrigerant: 762 TR. Fan HP: 40. Airflow Rate: 134,600 CFM. Pump Motor: [2] 5 HP. Shipping Weight: 42,590 lbs [17,340 lbs heaviest section]. Overall dimensions: [2] fan sections: 13 feet 2 inches L x 11 feet 10 inches W x 10 feet H [each], [2] coil sections: 14 feet L x 11 feet 11 inches W x 8 feet H [each], [1] section of frame work: 14 feet 4 inches L x 8 feet 4 inches W x 8 feet 4 inches H [each].[ACN1203a]

2003 Miller-Leaman Inc. Turbo-Disc Process Cooling Water Filtration System

2003 Miller-Leaman Inc. Turbo-Disc Process Cooling Water Filtration System. Model: ATD2(2)x3-130M-P135-A. Turbo-Disc filter systems are designed for the filtration of water for cooling towers and chilled water systems and require a supply of compressed air for operation. Rated capacity: 135 gpm @ 80 psi max. Electrical requirements: 110 V. U.S. Electrical Motor 10 hp. Bermad, 350 series back wash valve. Overall dimensions: 3 ft. 6 in. L x 2 ft. 6 in. W x 5 ft. 3 in. H.(ACN110).

Used 1997 Evapco Evaporative Condenser – 1770 Tons

Used 1997 Evapco Evaporative Condenser. Model: PMCB 1770. Nominal capacity: 1770 Tons using R-22 at 105ºF condensing temperature, 40ºF suction temperature, and 78ºF wet bulb temperature. R-717 [ammonia] capacity rating: 1255 tons at 96.3ºF condensing temperature, 20ºF suction temperature and 78ºF wet bulb temperature. [2] 30 hp and [2] 15 hp fan motors at 460V, 60 Hz, 3 phase. [2] 7.5 pump motors at 460V, 60 Hz, 3 phase. [6] fans. [2] Hansen Technologies hand valves, [2] Henry hand valves, [4] Hansen Technologies Pressure relief valves Cat. No. H5602. [2] manways, 20 in. diameter. Inlet / outlets: [2] 2 inch threaded, [1] 3 inch threaded, [1] 3-1/2 inch threaded, [2] 6 inch, [8] 4 inch. Overall dimensions: 36 feet 3-1/2 inches L x 11 feet 11-1/4 inches W x 15 feet 7-3/4 inches H.[H].[acn2066]

Used 1994 Evapco PMCA Series Evaporative Condenser – 1250 Tons

Used 1994 Evapco Evaporative Condenser. Model: PMCA-1250. Nominal rated capacity: 1250 tons using R-22 at 105ºF condensing, 40ºF suction, and 78ºF wet bulb temperatures or 887 tons using R-717 at 96.3ºF condensing, 20ºF suction and 78ºF wet bulb temperatures. [2] pumps with [2] motors: 7-1/2 HP, 230/460V, 60 Hz, 3 phase. [6] fans with [4] fan motors: [2] at 20 HP, and [2] at 10 HP, 230/460V, 60 Hz, 3 phase, CFM: 219,000, water flow 2,060 gpm. Overall dimensions: 30 feet 1 inch L x 10 feet W x 13 feet 3 inches H.

BAC VXMC-860-H Evaporative Condenser - 860 Tons

BAC VXMC-860-H Evaporative Condenser. 860 nominal tons using R-22 at a 105ºF condensing temperature, a 40ºF suction temperature, and a 78ºF wet-bulb temperature. 610 tons using R-717(ammonia) at a 96.3ºF condensing temperature, a 20ºF suction temperature, and a 78ºF wet-bulb temperature. (6) fans. (2) 5 hp pumps. Belt: 6-B144. Shipping Weight: 44,740 lbs (15,240 lbs heaviest). Overall Dimensions: 35 ft. 9-1/4 in. L x 9 ft. 10-1/8 in. W x 13 ft. 1-7/8 in. H.

Used BAC Evaporative Condenser - 357 Tons

Used BAC Evaporative Condenser. Model: C1462N. S/N: 87100575. Nominal capacity: 357 tons using R-22 at 105ºF condensing, 40ºF suction and 78ºF wet bulb temperatures or 253 tons using R-717 at 96.3ºF condensing, 20ºF suction and 78ºF wet bulb temperatures.[ACN580-87].

Used Evapco Evaporative Condenser – 650 Tons

Used Evapco Evaporative Condenser. Model: PMC-650N. Nominal capacity: 650 tons using R-22 at 105ºF condensing temperature, 40ºF suction temperature, and 78ºF wet bulb temperature. R-717 [ammonia] capacity rating: 462 tons at 96.3ºF condensing temperature, 20ºF suction temperature and 78ºF wet bulb temperature. Includes [2] 10 kW pan heaters 230/60/3 with thermostat and low water cutoff. Overall dimensions: 27 feet L x 9 feet 11-3/4 inches W x 13 feet 9-1/2 inches H.[ACN850-86].

Used Baltimore Air Coil Evaporative Condenser - 400 Tons

Used Baltimore Air Coil Company Evaporative Condenser. Nominal rated capacity: 400 tons using R-22 at 105ºF condensing, 40ºF suction, and 78ºF wet bulb temperatures or 288 tons using R-717 at 96.3ºF condensing, 20ºF suction and 78ºF wet bulb temperatures. Last used with ammonia. The fans, motor, and drive system are located outside of the moist discharge airstream, protecting them from moisture, condensation and icing. Unit is suitable for year-round operation. Number of fans: 8. Fan diameter: 1 feet 7 inches Number of motors: 4. Typical motor, 7.5 horse power, 1740 rpm, 230/460 V, 21.6/10.8 amps, 60 Hz, 3 phase. Inlets: [2] 3 inches diameter ports, [1] 4 inches diameter port. Outlets: [2] 2 ½ inches diameter ports, [1] 6 inches diameter port. Overall dimensions: 18 feet 6 inches length x 9 feet 1 inches width x 10 feet 6 inches H.[ACN565-76][BH].

Unused 2007 Evapco Evaporative Condenser Towers – 2569 Tons

(2) Unused 2007 Evapco Evaporative Condenser Tower – 2569 Tons. This unit if used as a refrigerant condenser would be model eco-ATC-2569-1g (nameplate model number: ATW 672-5M). Serial Numbers: 7-315810 and 7-315811 . Nominal tonnage rating with R-507: 2569 TR. Rating with R-717 Ammonia: 1822 TR with standard conditions (96.3F condensing, 20F suction, 78F wetbulb). Coil test pressure 400 PSIG. (4) coil/fan sections. (4) 30 hp fan motors. (2) basins, galvanized. (4) 5 hp pumps, 1800 gpm. Shipping weight: 106,640 lbs (heaviest section: 23,550 lbs). Overall dimensions: 11 ft. 10 in. W x 28 ft. 2 in. L x 16 ft. 11 in H. Two complete units available (ACN4800).

Unused 2007 Evapco Evaporative Condenser Tower – 1285 Tons

Unused 2007 Evapco Evaporative Condenser Tower – 1285 Tons. This unit if used as a refrigerant condenser would be model eco-ATC-1285-1g (nameplate model number: ATW 672-5M). Serial No: 7-315810. Nominal tonnage rating with R-507: 1,285 TR. Rating with R-717 Ammonia: 912 TR with standard conditions (96.3F condensing, 20F suction, 78F wetbulb). Coil test pressure 400 PSIG. (2) coil/fan sections. (2) 30 hp fan motors. (1) common basin, galvanized. (2) 5 hp pumps, 1800 gpm. Shipping weight: 53,220 lbs (heaviest section: 23,550 lbs). Overall dimensions: 11 ft. 10 in. W x 28 ft. 2 in. L x 16 ft. 11 in H.(ACN2400).

Used Imeco XLP Series Evaporative Condenser – 805 Tons

Used Imeco Evaporative Condenser. Model: XLP-XL 805. Rated capacities: 805 tons with R-22 at 105ºF condensing, 40ºF suction and 78ºF wet bulb and 580 tons using R-717 at 96.3ºF condensing, 20ºF suction, and 78ºF wet bulb. Maximum pressure: 250 psi. [3] 62 inch dia. fans. Electric Fan Motor, 25 hp, 1760 rpm, 230/460 V, 62/31 amps, 60 Hz, 3 phase. Fan Motor: 15 hp, 460 V, 18.3 FLA. [1] Manway, dimensions: 1 foot 10 ½ inches dia. Approximate dimensions: 25 feet W x 12 feet L x 15 feet H.

Used VRTX™ Water Treatment System

Used VRTX™ Water Treatment System. Model: VRTX 125. Capacity: 125 gph. Used in combination with a water filtration system for the non-chemical water treatment of open cooling towers or evaporative condensers. Advantages in using the VRTX™ system include control of bacteria, corrosion and scale build-up in those water systems. G&L centrifugal pump: size: 1.5 x 2.5 x 8. Baldor industrial motor, 15 hp, 208-230 / 460V, 3450 rpm, 60Hz, 3 phase. Overall dimensions: 3 ft. 4 in. L x 2 ft. 3 in. W x 4 ft. 4 in. H.[ACN316].

Used Baltimore Aircoil Company Evaporative Condenser Coil Section

Used Baltimore Aircoil Company Evaporative Condenser Coil Section. Number of coils: 28. Number of rows: 16. Inlet: [2] 4 inches diameter Port, [1] 4 inches diameter MNPT port [water]. Outlet: [2] 4 inches diameter port, [1] 1 ¼ inches diameter port. Overall dimensions: 18 feet 9 inches length x 6 feet 8 inches width x 4 feet 10 inches height.

Used Baltimore Aircoil Company Evaporative Condenser

Used Baltimore Aircoil Company Evaporative Condenser. There is no tag to identify the model. It appears to be a model BAC300. Dimensions: 12ft. length x 10 feet width. [ID]

BAC VXMC-860-H Evaporative Condenser - 860 Tons

BAC VXMC-860-H Evaporative Condenser. 860 nominal tons using R-22 at a 105ºF condensing temperature, a 40ºF suction temperature, and a 78ºF wet-bulb temperature. 610 tons using R-717(ammonia) at a 96.3ºF condensing temperature, a 20ºF suction temperature, and a 78ºF wet-bulb temperature. (6) fans. (2) 5 hp pumps. Belt: 6-B144. Shipping Weight: 44,740 lbs (15,240 lbs heaviest). Overall Dimensions: 35 ft. 9-1/4 in. L x 9 ft. 10-1/8 in. W x 13 ft. 1-7/8 in. H.

BAC VXMC-860-H Evaporative Condenser - 860 Tons

BAC VXMC-860-H Evaporative Condenser. 860 nominal tons using R-22 at a 105ºF condensing temperature, a 40ºF suction temperature, and a 78ºF wet-bulb temperature. 610 tons using R-717(ammonia) at a 96.3ºF condensing temperature, a 20ºF suction temperature, and a 78ºF wet-bulb temperature. (6) fans. (2) 5 hp pumps. Belt: 6-B144. Shipping Weight: 44,740 lbs (15,240 lbs heaviest). Overall Dimensions: 35 ft. 9-1/4 in. L x 9 ft. 10-1/8 in. W x 13 ft. 1-7/8 in. H.

Used 1994 Vilter Evaporative Condenser - 300 Ton

Used 1994 Vilter Evaporative Condenser. Model: VPF 300. Rated capacity: 300 tons using R-22 at 105ºF condensing, 40ºF suction, and 78ºF wet bulb temperatures and 210 tons with R-717 at 96.3 condensing, 20ºF suction, and 78ºF wet bulb temperatures. Design pressure: 300 psig. The casing panels, tank section, condensing coil and fan spools are hot-dipped galvanized. The coil is constructed of ¾ inches steel pipe, staggered and are pitched for complete and free draining of refrigerant. The fan propellers are constructed of heavy duty cast aluminum and are dynamically balanced. Overall dimensions: 19 feet length x 9 ft 4 inches width x 10 feet H.{hb2}[ACN453].