|
|
Used APV Crepaco Amerio Manual Contact Plate Freezer. Model: 15-A. Serial Number: C-0947. Refrigerant: recirculated ammonia [R-717]. Number of plates: 17. Plate material: aluminum. Approximate capacity rating on hamburger patties: 1419 pounds per hour. based on 1/4 inch thick patties, 1/4 pounds each, going from a starting temperature of 40°F to a core temperature of 0°F, where plate temperature is -45°F and approximately 18 tons of refrigeration is used. Amerio contact plate freezers offer an alternative to freezing, as products come into direct contact with plates that freeze products to a core hardness of 0°F at an average of one inch per hour. Not only is this method less expensive than air blast or cryogenic alternatives, but other benefits include: preserved product texture, uniformity and nutrient retention as smaller ice crystals are formed and damage to cells is virtually non-existent. Applications include meats, vegetables, ice creams, bakery products and packaged entrees. Control Box: 220 / 208 bolt 3-phase. Plate dimensions: 5 feet 1 inches length x 3 feet 8 inches width. Plate thickness: 1 inches Includes [25] 1 feet 8-3/4 inches length x 11-3/4 inches width x 2-1/4 inches height. product trays. Overall dimensions: 8 feet 8 inches length x 6 feet 3 inches width x 8 feet 11 inches H.[ACN594]. (BF).
|
|
Click here for additional information (pdf - 671.6 KB) Click here for more information (pdf - 514.0 KB)
|
|
Stock No: re_EELD809.13 |
Mfg: APV Crepaco |
Model: 15-A |
S/N: re_C-0947
|
|
|
|
|
Used Morris & Associates IQF Freezer. Stainless steel. Model: CBF-20T-248-32. Continuous 24 inches stainless steel belt; 8 passes, 3,000 pounds peas per hour. Belt height clearance: 3 in. Number of fans: 8. Fan motor HP: 1. Freon evaporator coil holding pressure. Overall dimensions: 34 feet length x 7-1/2 feet width x 9 feet height.
|
|
Click here for more information (pdf - 632.2 KB)
|
|
Stock No: re_125.489 |
Mfg: Morris |
Model: CBF-20T-248-32 |
S/N: re_942-573
|
|
|
|
|
Used Integrated Process Systems Cryotransfer IQF Tunnel. Model: CK. SN: 71142-CK2004. Liquid Nitrogen Flash Freeze Process. Product clearance: 48 inches width x 7-1/2 inches height. Belt width: 24 inches Uses [8] 16 inches diameter cooling fans with Reliance Motors, 1/2 horse power, 1725 rpm, 230/460 V, 2.2/1.1 amps, 60 Hz, 3 phase. [2] Reliance Electric Conveyor Motors, 1-1/2 horse power, 1725 rpm, 230/460 V, 6.4/3.2 amps, 60 Hz, 3 phase. Reese RV Drive, gear ratio: 70, final speed: 60 rpm. [2] 12 inches diameter blowers one with motor. Piston-assist, lift-top covers. Conveyor infeed height: 45 inches Conveyor exit height: 40 inches Overall dimensions: 53 feet 5 inches length x 89 inches width x 77 inches height.
|
|
Click here for more information (pdf - 603.6 KB)
|
|
Stock No: re_JHFL001.50 |
Mfg: Integrated Process Systems |
Model: CK |
S/N: re_71142-CK2004
|
|
|
|
|
Used I.J. White Spiro-Freeze Spiral Freezer. Model: 26-A1–577. Features: bolted construction, bottom load “up go" design and an I.J. White control panel. Cramer hour meter: 28,151 hrs. Belt width: 670 feet length x 26 inches width x 2-1/4 inches height. Belt material: stainless steel. Drum frame model: 26-AL-601-F. Drum size: approximately 12 feet diameter Number of tiers: 13. Drum frame material: aluminum. Belt speed: 30 FPM. Dwell time: 21 minutes. Main drum drive motor: 3 horse power, 230/460 V, 3 phase. Sew Euro drive. Ratio: 126.75, Out feed motor: 1.5 horse power, 208-230/460 V, 3 phase.
|
|
Click here for more information (pdf - 577.6 KB)
|
|
Stock No: re_MDFP112 |
Mfg: I.J. White Corporation |
Model: 26-A1–577 |
S/N: re_5907
|
|
|
|
|
Used 1995 Freezing Systems Inc. Spiro-Freeze Spiral Freezer. Model: 1210-20-L36. Rated at 500 to 1500 pounds per hour based on product and application. Originally used for 1,100 lbs. per hour of tortellini going from 130°F to 35°F using -5 to -7 degree air with a dwell time of 8 minutes. Freeze time for hamburger patties [4.0" dia. x 4.0 oz.] placed 2 wide, side by side, would be approximately 600-650 lbs./hr. with an 18 minute dwell time. This is a 10 tier, counter-clockwise rotating spiral freezer with a 240 ft. [active 202 ft.] x 12 in. wide, chain link belt, and 3 in. of clearance between tiers. Conveyor infeed height: 3 ft. 4 in. Conveyor exit height: 6 ft. 10 in. Conveyor infeed and discharge access-way dimensions: 1 ft. 6 in. L x 10-1/2 in. H. Features a McCormack blast evaporator with 20 sq. ft. of coil surface area rated at 10 tons. Overall dimensions: 13 ft. L x 11 ft. W x 10 ft. H.[ACN1670].[BI].
|
|
Click here for more information (pdf - 2,521.6 KB)
|
|
Stock No: re_ATGP205.70 |
Mfg: Freezing Systems Inc. |
Model: 1210-20-L36 |
S/N: re_12-509
|
|
|
|
|
Used 2001 FMC Frigoscandia Advantec Impingement Freezer/Chiller. Model 2M-1800-1. Rating on hamburger patties: 3,500 pounds per hour based on 1/4 inch thick patties, 1/4 lb each,10 across on belt, belt length: 35 feet.. 100 seconds dwell time, using 46 tons at -40°F. Single belt: 49 inches width [1250 mm]. This impingement freezer/chiller is ideal for quick freezing thin products with minimal dehydration, gentle product handling and high product quality. A major food manufacturer paid over $750,000 for this unit in 2001. This major food manufacturer had this at a co-packer that sold to their largest competitor so they removed it. It is as close to new as you can get. Overall dimensions: 36 feet 2 inches length x 9 feet 5 inches width x 9 feet height.
|
|
Click here for product manual (pdf - 2,786.2 KB) Click here for a Coil Certificate (pdf - 159.9 KB) Click here for Additional Drawings (pdf - 130.2 KB) Click here for more information (pdf - 809.0 KB)
|
|
Stock No: re_SGMPB057.180 |
Mfg: FMC |
Model: 2M-1800-1 |
S/N: re_01080018
|
|
|
|
Used 1995 Freezing Systems, Inc. Single Pass “Econo” Modular Freezer Box with Stainless Steel Belt. Conveyor belt width: 26 inches Gap between links: 1 inches Thickness of flat wire: 0.066 inches Distance between rods: 1 inches Rod diameter: 0.192 inches Current maximum aperture/clearance above belt: 26 inches width x 1 inches height. Conveying distance inside box: 19 feet 4 inches Conveyor infeed/exit height: 3 feet 1 inches height. Sterling Electric Motor, 1-1/2 horse power, 1720 rpm, 208-230/460 V, 4.6-4.8/2.4 amps, 60 Hz, 3 phase. Hub City speed reducer. McCormack Manufacturing aluminum evaporator. ”M” Series model: 2PCM21C101/2/4WTAOGC. Refrigerant: top feed, recirculated R-717 [ammonia] with water defrost. Capacity: 10 tons at air temperature of: -18°F and suction temperature -30°F. Air flow CFM: 11,000. [138] aluminum, staggered tubes, finned length: 96 inches Aluminum coil fins are 10 rows deep with varied fins per inch: 2R@1, 2R@2, 6R@4. [2] 30 inches diameter, sloped fans. with guards. Teco Motor, 3 horse power, 1755 rpm, 230/460 V, 8.6/4.3 amps, 60 Hz, 3 phase. Magnetek Motor, 3 horse power, 1760 rpm, 230/460 V, 8.2/4.1 amps, 60 Hz, 3 phase. [2] 3 feet width x 6 feet 5 inches height. access doors. Inlets: [1] 2 inches diameter liquid port [defrost], [1] 1 inches diameter refrigerant feed port. Outlets: [1] 2 inches diameter refrigerant suction port, [1] 4 inches diameter drain port, [2] 8 inches width x 3 inches height. drain ports. Overall dimensions: 22 feet 6 inches length x 8 feet 4 inches width x 9 feet 3 inches height.
|
|
Click here for more information (pdf - 642.4 KB) Click here for additional information (pdf - 81.9 KB)
|
|
Stock No: re_ATGP005.20 |
Mfg: Freezing Systems Inc. |
Model: |
S/N: re_
|
|
|
|
Used Freezing Systems Spiro-Freeze Spiral Freezer. This freezer will allow user to freeze two separate product streams at the same time. Air inflow is from top down through center and then up through stacked tiers containing product before. [2]Infeed belts begin side by side and stack as they enter the freezer. Last used to freeze 1.8 oz eggplant pieces. Pieces entered at 180 °F with a 22 minute dwell time and exited at 18-20 °F. Capacity: approx. 2600 pounds per hour. Spiral freezer: 1 tower, 2 stacks, 8.5 tiers each. Infeed height: 36 inches each belt. Discharge height: belt #1- 11.3 inches; belt #2- 11.9 inches Tier spacing: 6 inches Product clearance: 3 inches Belt width: 30 inches; usable 28 inches Active belt length: 854 feet; total belt length 1110 feet Ram AC variable drive: 7.5 horse power. Setup to work with a 400 horse power refrigerant compressor which is not included. [6] Fans, air vol. 140,800 cubic feet per minute, 7.5 horse power. 1999 Imeco condenser, evaporator, 1999 Frick separator, receiver, electric control panels. Overall dimensions: 35 ft length x 35 ft width x 15 ft height. Installed in 2000; decommissioned in October 2005. Ran 50 weeks/yr; 45 hrs/week.
|
|
Click here for more information (pdf - 695.4 KB) Click here for drawings of Concrete floor (pdf - 524.4 KB) Click here for Kolpak blueprint information (pdf - 315.4 KB)
|
|
Stock No: re_DMNY001.385 |
Mfg: Freezing Systems |
Model: |
S/N: re_
|
|
|
|
|
Used Chemetron 3 Pass Liquid CO2 Cryogenic Freezer. Model: Ultra Freeze. [3] Stainless steel mesh belts. Mesh size opening: 1/2 inches x 1 inches Height available above belts: approx. 2-1/2 inches Belt: 48 feet length x 32 inches width. [8] panel sections per side of tunnel with [2] fans per section. [16] Baldor fan motors: 1 horse power, 1140 rpm, 230/460 V, 3.4/1.7 amps, 60 Hz, 3 phase. [2] Conveyor motors: 3/4 horse power, 1725 rpm, 230/460 V, 2.2/1.1 amps, 60 Hz, 3 phase. Boston Reducer. Penta-Drive DC motor speed control. Overall dimensions: 48 feet length x 4 feet 10 inches width x 5ft. 6 inches H.
|
|
Click here for more information (pdf - 380.0 KB)
|
|
Stock No: re_DSBI072.11a |
Mfg: Chemetron |
Model: Ultra Freeze |
S/N: re_
|
|
|
|
Used 1993 IJ White Stainless Steel Spiral Freezer. Approx 16-Tier high. 14 feet Dia. Product clearance 24 inches width x 4- 3/8 inches height. Belt Length: 720 feet usable, 770 feet total. Belt is 26 inches width 1" x 1" stainless steel , double-reinforced, metal link belt conveyor. Tier Pitch: 7 1/8". Set up to do 3,000 pounds per hour of various cuts of beef. Refrigerating system coils rated 45 tons. Belt tensioning system, bally modular insulated freezer room. Frick refrigerating system, heat exchange coils in box. Frick Model RNB11-134E Liquid Chiller [Serial Number: S0564MFMPTUAB3], Caterpillar Model 3306SI, 6-Cylinder, 185 horse power Diesel engine, natural gas [Serial Number: 07404356]. Frick Model PRR Refrigerant roof mount recirculation, roof mounted condenser, inclined metal link discharge conveyor. Set up to do 3,000 pounds per hour of various cuts of beef. Refrigerating system coils rated 45 Tons. We will change the gas motor to electric motor at no charge if customer desires. Overall dimensions: 26 feet 11 inches length x 22 feet 2-1/2 inches width x 15 feet height.
|
|
Click here for more information (pdf - 2,384.7 KB) Click Here to See Frick Compressor with Cat Engine (pdf - 553.1 KB)
|
|
Stock No: re_KBMW156.429a |
Mfg: I.J. White |
Model: |
S/N: re_
|
|
|
|
|
Used Flexco Far-Pul Conveyor Installation Belt Tool. [5] pieces. Overall dimensions: 3 feet 5 inches length x 2 ½ inches width x 7 inches height.
|
|
Click here for more information (pdf - 128.6 KB)
|
|
Stock No: re_MDFP010.a |
Mfg: Flexco |
Model: |
S/N: re_
|
|
|
|
|
Used I.J. White Spiro-Freeze Spiral Freezer. Bottom Load "Up Go" Design. I.J. White control panel. Cramer hour meter: 52,163 hrs. [2] belts, dimensions each: 850 feet length x 26 inches width x 3-1/4 inches height. [*NOTE: Spiral with un-installed Belt]. Belt material: stainless steel. Drum frame model: 26-AL-579-F-B. Drum size: Est. 14 feet diameter Number of tiers: 18. Drum frame material: Aluminum. Belt speed: 90 FPM. Dwell time: 17 Min. Controls including Reliance and Allen Bradley VFD's. Main drum drive motor – 7.5 horse power, 300-1800 rpm, 230/460 V, 18.8/9.4 amps, 60 Hz, 3 phase. Sew euro drive. Ratio: 115.63, Out: 2.6 – 16 rpm, In: 300-1800 rpm, Torque: 31,777. Out feed motor – 2.0 horse power, 1735 rpm, 208-230/460 V, 6.5-6.2/3.1 amps, 60 Hz, 3 phase.
|
|
Click here for more information on the first spiral (pdf - 760.6 KB) Click here for more information on the second spiral (pdf - 1,009.5 KB)
|
|
Stock No: re_MDFP122 |
Mfg: I.J. White |
Model: |
S/N: re_
|
|
|
|
Used 1992 Freezing Systems Inc. Spiral Freezer. Model: 1618-[2]47-L18D. Spiral conveyor diameter: 8 feet 7 inches Stainless Steel Honeycomb Flat Wire Conveyor, belt width: 16 inches with approximately 18 tiers. Gap between links [min/max]: 1/2 inches & 1 inches, thickness of flat wire: 0.06 inches, distance between guides: 2-3/4 inches, distance between rods: 1.122 inches, rod diameter: 0.20 inches Container dimensions: 2-5/8 inches length x 2-5/8 inches width x 2-1/4 inches height. U.S. Electric Motor, 10 horse power, 1755 rpm, 230/460 V, 27.2/33.4 amps, 60 Hz, 3 phase. 1992 Rex Planet Gear Speed Reducer, Model: VCIA0444-15497, Serial Number: 15497-1A, ratio: 69.63, rpm in: 1750, rpm out: 25, torque: 20,000 in-lb. Hub City Drive, Model: 66, style: 928, ratio: 1. Centric Clutch, Serial Number: 204337. Internal Century System Control Panel, Serial Number: J02-92102-11. Power supply: 460 V, 30 amps, 60 Hz, 3 phase. Conveyor infeed height: 2 feet 2 inches Conveyor exit height: 11 feet 2 inches Overall dimensions: 11 feet 1/2 inches length x 9 feet 6 inches width x 12 feet height. 1992 McCormack Evaporative Condenser. Model: 47 Spiral Evaporator. Serial Number's: 9262E-1, 9262E-2. Combined coil capacity: 62.0 TR at 10 degree TD. Refrigeration type: R-717 [ammonia]. [576] 15/16 inches diameter x 10 feet 10 inches length tubes. Approx. coil volume: 220 gal. [2] fins per inches Power supply: 460 volts, 60 Hz, 3 phase. Design pressure: 150 psi. Test pressure: 400 psig. [4] 42 inches diameter fans, 7.5 horse power, 2 amps. Inlets: [2] 5 inches diameter ammonia infeed flanged ports, [1] 2-1/2 inches diameter liquid infeed port. Outlets: [2] 4 inches diameter ammonia discharge flanged ports, [1] 6 inches diameter discharge port. Overall dimensions: 13 feet 8 inches length x 10 feet width x 11 feet 8 inches height. 1992 Morfab Company Ammonia Surge Drum- 700 Gallon. Serial Number: 4737. Nat'l Bd: 3737. Inside straight-wall dimensions: 3 feet 6 inches diameter x 9 feet 11 inches L. Hansen Technologies Float, Serial Number: PK32B, Cat. No: ER.04N, Size: 3 feet 4 inches probe. Inlets: [1] 1-1/2 inches diameter liquid feed port, [1] 6 inches diameter compressor suction port, [1] 8 inches diameter liquid suction flanged port, [1] 8 inches diameter liquid suction port. Outlet: [1] 5 inches diameter liquid-out port, [1] 1/2 inches diameter FNPT fitting. This was last used for cooling small pudding containers. Overall dimensions: 10 feet 11 inches length x 7 feet 1-1/2 inches width x 5 feet 8 inches height.
|
|
Click here for more information (pdf - 2,816.8 KB) Click here for Drawings (pdf - 99.7 KB)
|
|
Stock No: re_pCFPH476.113a |
Mfg: Freezing Systems Inc. |
Model: 1618-(2)47-L18D |
S/N: re_
|
|
|
|
|
Used Modular Spiral Freezer Box, 15 feet x 30 feet x 15 feet It housed a 1992 Freezing Systems, Inc. Spiral Freezer. Wall thickness: 4 inches
|
|
Click here for more information ([1] - 45.3 KB)
|
|
Stock No: re_pCFPH477. |
Mfg: Not Specified |
Model: |
S/N: re_
|
|
|
|
|
Used 1991 I.J. White Double Spiral Freezer Conveyor. 32 inches wide x approx 645 feet length long belt, approx 3 inches
clearance between tiers, with take-up assembly job #J-90213 I.J. Last use: 3,200 pounds per hour of rolls and
bagels. Product input temperature was 67 degrees F; output temperature was -20 degrees F. White
Lower Spiral Freezer Conveyor, 32 inches wide & approx 450 feet long delrin type blue plastic belt, with takeup,
and flat belt infeed assembly from entry point of enclosure, 3 inches between belts. Inclined Conveyor
Assembly. Connecting lower & upper spirals with horizontal crossbelt conveyor , aluminum frame, [1] 20
ft. incline 32 inches stainless steel belt, [1] 20 feet crossover 32 inches stainless steel belt,[1] 18 feet decline 24 inches
metal belt, [1] 5-1/2 discharge 24 inches metal belt.
|
|
Click here for more information (pdf - 453.0 KB)
|
|
Stock No: re_RPCN096.44 |
Mfg: I.J. White |
Model: |
S/N: re_
|
|
|
|
|
Used Northfield Freezing Systems [Now JBT Corporation] Spiral Freezer. Belt width: 1 feet 8 inches Maximum aperture/clearance 1 feet 6 inches width. x 4 inches height. Number of passes: 10. Approximate belt length: 190 feet [2] Baldor industrial motors: 3 horse power, and [2] Sumitomo speed reducers. Conveyor infeed height: 10 feet 2 inches Outlet feed height: 3 feet Overall dimensions: 11 feet 6 inches length x 7 feet 3 inches width x 11 feet 5 inches height.
|
|
Click here for more information (pdf - 929.0 KB)
|
|
Stock No: re_SMBS366.150 |
Mfg: Northfield Freezing Systems (Now JBT Corporation) |
Model: |
S/N: re_
|
|
|
|
|
|